Baytech RPS Single-phase Combined Manuel d'utilisateur télécharger pdf (Page 12)

RPS with or without Ethernet

Type ‘voltage’ at the prompt to display the unit’s True RMS Voltage, and the RPS will display the

following:

Type ‘power’ at the prompt to show the unit’s Average Power and the RPS will display the following:

Type ‘temp’ at the prompt to show the unit’s current temperature, the RPS will display the following:

NOTE: RPS units with external sensor ports will be displayed as Ext 1 and/or Ext 2.

Logging Out

Type Logout, Logoff, or Exit at the prompt to logoff from the unit.

Current User Password:

Type ‘password’ at the prompt to change the current user’s password and the RPS will display the

following:

Internal Temperature: 87.8 F Ext. 2: 70.0 F

Unit ID: BT RPS26ADEN-16

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------

-------------------------------------------------------------------------------

----------------------------------------

| Phase | Average | Volt- |

| Group | Power | Amps |

----------------------------------------

| Phase A1 | 0 Watts | 52 VA |

| Phase A2 | 0 Watts | 67 VA |

| Phase B1 | 0 Watts | 4 VA |

| Phase B2 | 0 Watts | 4 VA |

----------------------------------------

--------------------------------

| Phase | True RMS |

| Group | Voltage |

--------------------------------

| Phase A1 | 209.6 Volts |

| Phase A2 | 209.5 Volts |

| Phase B1 | 1.3 Volts |

| Phase B2 | 1.4 Volts |

--------------------------------

Enter new Password:

Re-Enter new Password:

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Pas de commentaire

Baytech RPS Single-phase Combined Manuel d'utilisateur Page 12